Units

This section lists all dimensions and units available in HH Data Management.

Dimension	Units Available
Acceleration	["g"] ["m/s²"] ["ft/s²"] ["mm/s²"]
Angle	["deg"] ["rad"] ["g"] ["min"]
Area	["mm²"] ["cm²"] ["m²"] ["in²"] ["ft²"]
Density	["kg/l"] ["ppg (U.S.)"] ["kg/m³"]
Duration	["sec"] ["min"] ["hr"] ["msec"]
Electric Charge	["Ah"] ["kAh"] ["C"]
Electric Current	["A"] ["mA"] ["µA"]
Electric Potential	["V"] ["kV"] ["mV"] ["µV"]
Electric Resistance	["Ω"] ["MΩ"] ["kΩ"] ["mΩ"]
Energy	["kJ"] ["MJ"] ["J"] ["Wh"] ["kWh"]
Force	["N"] ["lbf"] ["daN"] ["kgf"]
Force Per Length	["N/mm"] ["N/m"] ["lbf/in"] ["daN/m"] ["daN/mm"]
Frequency	["Hz"] ["kHz"] ["MHz"]
Length	["mm"] ["cm"] ["m"] ["km"] ["in"] ["ft"] ["mi"]
Mass	["kg"] ["g"] ["mg"] ["lb"] ["oz"]
Mass Flow	["kg/s"] ["kg/h"]
Moisture	["cB"]
Power	["W"] ["hp(I)"] ["kW"]
Pressure	["kPa"] ["bar"] ["psi"] ["mbar"] ["hPa"] ["inHg"] ["Pa"]
Ratio	["%"] [""]
Reciprocal Length	["1/m"] ["1/cm"] ["1/mm"] ["1/mi"] ["1/ft"] ["1/in"]
Rotational Acceleration	["rad/s²"] ["deg/s²"]
Rotational Speed	["rpm"] ["deg/s"] ["rad/s"]
Rotational Stiffness	["N·mm/deg"] ["daN·mm/deg"] ["N·mm/rad"] ["lbf·ft/deg"] ["lbf·ft/rad"] ["N·m/deg"] ["daN·m/deg"] ["N·m/rad"]
Speed	["mph"] ["m/s"] ["km/h"] ["mm/h"] ["in/s"] ["mm/s"]
Temperature	["°C"] ["°F"] ["K"]
Temperature Change Rate	["°C/s"] ["°C/min"] ["°F/min"] ["°F/s"] ["K/s"] ["°C/h"] ["K/h"] ["°F/h"]
Temperature Delta	["∆K"] ["∆°C"] ["∆°F"]
Torque	["N·m"] ["lbf·ft"]
Unitless
Volume	["l"] ["ml"] ["gal (U.S.)"] ["oz (U.S.)"] ["gal (imp.)"] ["oz (imp.)"] ["m³"] ["cm³"] ["in³"] ["ft³"] ["qt (U.S.)"] ["qt (imp.)"]
Volume Flow	["L/s"] ["L/min"] ["gal (U.S.)/s"] ["gal (U.S.)/min"]
Volume Per Length	["l/km"] ["l/m"] ["l/mm"]

tip

Units in HH Data Management are case sensitive. It is better to copy directly the unit from this help file to avoid mistake.

Some units are using special characters:

interpunct → · → ALT+0183

superscript 2 → ² → ALT+0178

o superscript → º → ALT+167